How To Deep Clean A Bathroom Wall?

A neat and clean bathroom is not just about shiny floors and a gleaming mirror; walls play an important role in the overall look and cleanliness of the space. Soap scum, mildew, and water spots form on them over time, which makes the walls look dull and shabby. If you’re preparing for a rental inspection, having your bathroom walls thoroughly cleaned might be really beneficial. Landlords see everything, and neglecting the walls provides a bad first impression.

This blog explores how to deep clean bathroom walls, whether you’re tackling the best end of lease cleaning Newcastle or just refreshing your space. By completing a few simple steps, you may restore the freshness of your bathroom walls and ensure that they meet the high standards demanded by inspectors.

1. Identify the Type of Wall Surface

Before you start cleaning the bathroom walls, carefully identify the type of wall surface, as this will affect how you clean them. Painted walls, typical of most bathrooms, can withstand some moisture but will be harmed with too much scrubbing. Tiled walls, which are typically used in shower areas, are strong but vulnerable to soap scum and mould. Wallpapered walls, although less prevalent in bathrooms, should be cleaned with care so they won’t be harmed.

Knowing the wall type enables you to choose the most appropriate cleaning solutions and methods, leading to effective cleaning without too much wear and tear. The wrong method can lead to discolouration, peeling, or even permanent damage.

2. Remove Surface Dust and Cobwebs

Bathroom walls may not appear dusty, but they do acquire little particles over time. Begin by cleaning the surface with a dry microfiber cloth or duster. Be extra careful in corners and ceiling edges where cobwebs may accumulate. If your walls have ventilation fans in the area, they may also have accumulated dust that must be wiped clean.

For tile walls, drying the walls first with a dry cloth will remove loose debris before applying any water. This small trick makes the cleaning job more productive, as it stops dirt from spreading everywhere.

3. Choose the Right Cleaning Solution

The type of cleaning solution you use is determined by the amount of grime and the substance of the walls. Here are a few effective options:

• Vinegar and water: natural cleanser that works well on most surfaces, particularly tiles. Using a spray bottle, combine equal parts white vinegar and warm water.
• Baking soda paste: If you’re dealing with stubborn stains, mix baking soda with a bit of water to create a paste. Apply it to stains and let it sit before scrubbing gently.
• Mild detergent: A few drops of dish soap in warm water can be used on painted or wallpapered walls without damaging them.
• Hydrogen peroxide: If you see mould or mildew, spray it immediately on the affected area to safely remove it.

Always patch test prior to applying any solution to avoid damaging the surface.

4. Scrubbing and Stain Removal

Now that the cleaning solution has been prepared, the grime must be removed. Painted walls must be cleaned with a clean cloth or sponge using a circular motion to prevent streaks. To protect the paint, apply a tiny amount of water. Tiled walls call for a scrub brush or an old toothbrush to properly clean grout lines where the mold and dirt have settled, restoring them to their original colouring. For wallpapered walls, a damp (not wet) cloth is best; dab lightly on stains without rubbing too vigorously to prevent peeling.

When dealing with difficult stains, let the cleaning agent stay for a few minutes before scrubbing to break down the dirt and make cleaning easier. Gentle washing and frequent care can help prevent stains from becoming ingrained, making cleaning much easier later on.

5. Rinse and Dry Properly

Leaving water on bathroom walls will cause mould to grow, so drying is important. After cleaning, wipe the walls with a clean, damp cloth to get rid of any remaining cleaning solution. Next, use a dry microfiber cloth to soak up excess water.

For tiled walls, use a squeegee to remove water, especially in shower areas. This helps to prevent water spots from appearing and keeps the surface looking clean for longer. If feasible, keep the bathroom door or window open to improve air circulation and drying time. Using an exhaust fan can also help to reduce humidity and prevent further mould growth.

Deep Cleaning Bathroom Walls

Wrapping up

Deep cleaning your bathroom walls may appear difficult, but with the appropriate method, it becomes lot easier. Whether you’re doing end-of-lease cleaning in Newcastle or simply refreshing your bathroom, following these steps will ensure a pristine finish. Identifying the wall type, employing the appropriate cleaning solutions, and correctly drying the surface can make a significant impact. A clean bathroom not only looks good, but it also saves you money on bond payments. So get your cleaning products and give those walls the attention they deserve!