How to Clean Fabric Blinds and Shades
Fabric blinds and shades are an excellent and stylish alternative to the fabric curtains. It gives your home a sophisticated touch and easily fits in your budget. That is why the fabric blinds and shades have a pretty good demand in the market. But, it can quickly get dirty and thus, you need to clean them from time to time.
People usually hire professionals who perform end of lease cleaning in Newcastle as they have a better ideas and follow a proper cleaning checklist
to deal with the cleaning chores. However, you can also clean it at your place. All you need to know is the right process to clean it. Here is a step-by-step procedure to clean fabric blinds and shades. Have a look!
Basic Cleaning of Fabric Blinds and Shades
If there are any spills or stains on a specific area of the fabric blinds or shades, you need to spot clean that area. To spot clean it, you don’t need to unhook them from their place. You can clean it right there. Follow the step-by-step procedure mentioned here:
Step 1: Pull the blinds open
If the fabric blinds or the shades are off to one side, open it so that the entire surface is visible. It will help you to see where exactly the stain is. This will make the cleaning process easier because you will get easy access to the front and back of the blind or shade.
Step 2: Use a soft brush head attachment
Use a soft brush attachment to the hose of your vacuum cleaner. If you don’t have a soft brush attachment, buy one from any nearby hardware store in Newcastle. It will not allow the vacuum cleaner to damage the fabric of the blinds or shades.
Step 3: Clean each fabric blind separately
Once you have attached the soft brush to the hose of the vacuum cleaner, run it over the fabric panels or the shade, from top to bottom. Over time the fabric accumulates a lot of bacteria that cause infections
. So if required, repeat the process until you are satisfied. If you don’t have time for this, contact a company that perform end of lease cleaning in Newcastle.
Step 4: Prepare a cleaning Solution
Once you have removed all the dust and dirt from the surface, it is time to clean the stubborn stains. For that, you need to make a cleaning solution using mild dish soap (4 tablespoons) and water (4 cups). Mix it properly with the help of a spoon.
Step 5: Apply the solution on blinds and shades
Take a microfiber cloth and dip it into the solution. Then squeeze it well so that it is only wet and not dripping. Apply the solution on the top of blinds or the shades. Rub it gently to remove the stains. Repeat the process on each blind until all the marks are removed.
Step 6: Wipe off the solution
Hold a microfiber cloth under the running water and squeeze it properly to ensure it is only wet. Then rub the piece of cloth gently on the spots you have cleaned until the visible soap suds are removed. If any stains still visible repeat the procedure.
Step 7: Allow it to Air dry
Once you are done with the cleaning, allow the fabric of the blinds or the shade to get air dry for the next one to two days. Leave the blinds open and close it only after ensuring that they are completely dry.
Advance Cleaning of Fabric Blinds and Shades
The easiest way to deep clean the fabric blinds and shades is to hire professional cleaners
who perform high-quality end of lease cleaning in Newcastle. However, you can also clean it in your bathtub. Follow the procedure here:
Step 1: Take the blinds down
First, you need to unhook or detach each of the fabric blinds panel or the shades. Before you take them down, read the instruction properly as the direction of removing the blinds or shade may vary from set to set.
Step 2: Clean the blinds with a soft brush attachment
Lay all the fabric blind panels on a clean and flat surface. Then use a soft brush attachment in your vacuum cleaner and clean all the blinds one by one. If you want to clean shades, you also need to follow the same process.
Step 3: Prepare the cleaning solution
Once you are done with the dusting of the blind panel, it is time to prepare the cleaning solution. Fill your bathtub with water (around ½) so that you can easily submerge all the blinds. Then add mild dish soap (110g) in it and mix it properly.
Step 4: Dip the blinds or shade in the solution
As your cleaning solution is prepared, place all the vacuumed fabric blind panels or the shade into the bathtub. Make sure all of them all adequately submerged in the water. If the fabric panels float to the top, flip them from time to time. Depending on how dirty they are, you can keep them into the solution for at least 2 to 4 hours.
Step 5: Scrub the fabric of the blind or shade
Take out the panels from the soapy water solution. Then use a clean sponge to remove the remaining stains and dirt from the panel or the shades. While scrubbing, you need to be careful. Otherwise, the fabric can get damaged. That is why people opt for professional cleaners who perform end of lease cleaning in Newcastle
Step 6: Rinse the Blinds
When you are done with the scrubbing, wash all the panels one by one. Hold them properly under the running cold water and rinse them properly. Make sure that all the soap solution is completely removed from the fabric.
Step 7: Allow it to Air dry
If your fabric blinds and shades are properly cleaned, lay each of the panels on a flat surface that is perfectly clean. And leave them for at least one to two days so that it can air dry.
Cleaning fabric blinds and shades is not an easy thing to do because a little bit of mistake can damage the texture or the colour of the fabric. Thus, it is advisable to hire professionals who perform end of lease cleaning in Newcastle. They have experience and knowledge of cleaning such things. But if you want to do it yourself, follow the procedure mentioned here.